Identify particle and disinfectant concerns
Source, particle size, frequency, chlorine or chloramine use, and water test information are reviewed.
Done Right Since 1950 ✦
Sediment & Chlorine Filtration
Sediment filtration captures particles; carbon or other suitable media can reduce chlorine taste and odor. The system should be sized for particle load, disinfectant type, flow, contact time, pressure drop, and maintenance. One cartridge does not solve every water-quality concern.
Warning Signs & Reasons to Schedule Service
- Visible particles, rust, sand, or cloudy water.
- Chlorine taste or odor at multiple fixtures.
- Cartridges clog much sooner than expected.
- Pressure drops when several fixtures run.
- Existing carbon media is exhausted or bypassing.
What the Process Usually Includes
Choose stages and size
Micron rating, washable or replaceable cartridges, carbon type, media volume, flow, and pressure drop are compared.
Install for serviceability
Bypass, isolation, gauges, supports, drain or flush provisions, and clearance are planned.
Monitor performance
Pressure, taste, odor, cartridge condition, and scheduled replacement are tracked.
Advice for Common Situations
Finer is not always better
Very fine cartridges can clog quickly and reduce flow when pretreatment or larger capacity is needed.
Chloramine needs different planning
Standard carbon may require more contact time or specialized media.
Use pressure gauges
Upstream and downstream readings can help identify when the filter is restricting flow.
Investigate sudden sediment
A sudden change may reflect utility work, well issues, corrosion, heater sediment, or pipe disturbance.
Sediment & Chlorine Filtration FAQs
What micron filter should I use?
It depends on particle size, load, flow, housing capacity, and whether staged filtration is needed.
Does carbon remove hardness?
No. Carbon is generally used for taste, odor, chlorine, and selected organic compounds, not hardness minerals.
Why does my filter turn dark quickly?
It may be capturing a heavy particle load, corrosion products, manganese, carbon fines, or other material that should be identified.
Can filtration cause low pressure?
Yes. Undersized housings, clogged cartridges, restrictive media, or high demand can create pressure loss.