Professional Sewer Liners
Cured-in-place lining options for qualifying sewer lines where site conditions and pipe condition allow.
Trenchless rehabilitation for eligible piping.
Cured-in-place lining options for qualifying sewer lines where site conditions and pipe condition allow.
Choose a topic for a more detailed explanation of warning signs, service options, the work process, and common questions.
Structural rehabilitation for qualifying sewer lines.
Defects, access, diameter, bends, and grade conditions that affect eligibility.
Root, scale, protrusion, and debris removal before installation.
Verification of cure, continuity, connections, and final condition.
The line is cleaned and evaluated for diameter, length, bends, connections, offsets, collapse, grade, access, and structural condition.
Roots, deposits, protrusions, and debris are removed to the extent required. Bypassing, access, measurement, and liner design are planned.
The liner is installed and cured using the selected system while dimensions, pressure, temperature, and timing are controlled.
Connections are reopened when applicable, the liner is inspected, and the system is returned to service.
A clear proposal should identify any belly, grade, offset, connection, collapse, or diameter issue that remains after lining.
A liner follows the host pipe. Cleaning, measurement, protrusion removal, and defect review are critical to the result.
Clarify how active connections will be identified and reinstated and whether all connections are accessible from the liner route.
Consider service life, access, structural condition, diameter reduction, future connections, repairability, and cost—not just excavation avoidance.
A fully collapsed or severely deformed section generally cannot receive a liner without first restoring or replacing that section.
No. A liner follows the existing path and usually does not correct poor slope or a low area holding water.
It reduces the inside diameter slightly. The effect on flow depends on the original pipe, liner thickness, condition, and final shape.
They may be reinstated with specialized equipment when their location and geometry are known and accessible. The project plan should address each active connection.